V4 Truck Bed Fishing Rod Holder

🏷️ BUNDLE & SAVE — 10% OFF WHEN YOU DO BOTH SIDES.
One set covers one side of your bed. Most guys run a set on each side so their rods are cradled at both ends. Choose “2 Sets — Both Sides” above — that's from $61.20 per side, with the 10% already in the price.

Tangled lines and snapped tips every time you load up?

Loose rods roll, cross over each other, and chip your bed on every mile of washboard. The V4 locks 3–4 of them down in seconds — no drilling, no rattle, no damage to your truck — and pops off when you want your bed back.

16 five-star reviews. Built by hand in Mesa, Arizona. Lifetime warranty. Free standard shipping to all 50 states.

⏱️ Please note: every V4 is made to order. Orders take 3–5 business days to fulfill before they ship. Nothing sits on a shelf — we build yours after you order, then hand it to the carrier with tracking emailed to you.

🚛 RUNNING A TONNEAU COVER? YES — IT STILL WORKS.

This is the question we get more than any other, and most rod holders fail it. The V4 sits low, riding over the wheel wells rather than up in the middle of the bed — so your rods clear a closed cover. You keep your cover, you keep your security, and your rods still travel locked down.

Cover styles vary. Message us your truck and your cover type before you order and we'll confirm the clearance — takes us two minutes and saves you a return.

🛻 Will it fit YOUR truck? Here's the 5-second answer.

Most rod holders fail on fitment — the clamp won't open wide enough, or there's nowhere to mount. We build two versions so that doesn't happen to you:

• TRACK MOUNT — your truck HAS factory bed rails.
  Toyota Tacoma · Tundra · Nissan Frontier · Titan · Jeep Gladiator
  Bolts straight to the rail you already have.
• CLAMP SYSTEM — your truck has NO bed rails.
  Ford F-150 / F-250 / F-350 / Ranger / Maverick / Raptor · Chevy Silverado / Colorado · GMC Sierra / Canyon · RAM 1500–3500 / TRX · any flat bed
  Heavy-duty clamps grip the bed directly. More hardware, which is why it costs a little more.

Don't see your truck? Send us your year, make and model before you order and we'll confirm the fit. We'd rather spend two minutes now than have you send it back.

🔇 No bungee cords. No socks over your reels. No rattle.

Ask around and you'll find people taping, strapping and stuffing socks over their reels to stop the clanking — because most holders just cradle the rod and hope. The V4's adjustable elastic strap pulls each rod down into its slot and holds it there.

Rods stay put at highway speed and over washboard dirt. Stainless hardware, bolted or clamped to the bed — not a bracket that works loose at 60 and takes your rods with it.

🔨 Why not just build one out of PVC?

Plenty of guys try. The problem shows up the first time you load a spinning rod: PVC tubes and bungee setups won't clear the lower guides on a spinning reel, so you end up breaking your rods down or pulling reels off every trip. Same story with most cheap clamp racks — they hold something, just not the rod you actually fish.

The V4 takes your rods fully rigged. Reels on, line strung, ready to fish when you park.

🚣 Your bed floor stays completely open

Rods ride up on the rails, so everything you were already hauling still fits underneath. Customers keep telling us the same thing:

“Works perfect! My kayak fits in the middle of my bed and my rods in the rack over the fender well.”
— Gary, verified buyer ⭐⭐⭐⭐⭐

“Just what I needed to store my rods in the back of my truck along with my kayak!”
— Joe, verified buyer ⭐⭐⭐⭐⭐

Kayak, cooler, gear bags, dog crate — all still fit.

📦 One set, or both sides?

• 1 Set — One Side. Mounts on one side of your bed. From $68.
• 2 Sets — Both Sides — 10% OFF. A set on each side, so rods span across and are cradled at both ends. No flex, no bounce, no tips near the tailgate. From $61.20 per side.

Two sides costs the same however you order it — pick “2 Sets — Both Sides,” or add two single sets and the 10% comes off automatically at checkout. The 2-Set option is just simpler: one selection, one box, and you can't forget the second one.

Capacity is per set: pick 3-rod, or 4-rod if you haul extra gear or fish with a buddy.

🇺🇸 Built to outlast the truck it's bolted to

Marine-grade construction with stainless steel hardware — the same materials that survive salt water. Sun, rain, road salt and washboard backroads, season after season. No pot-metal brackets, no hardware store bolts that rust orange in a season.

• ✅ Installs in minutes — no drilling, no tools, zero permanent damage
• ✅ Rock-solid hold — the elastic strap kills the rattle
• ✅ Works under a tonneau — rods ride low over the wheel wells
• ✅ Takes rods fully rigged — reels on, no breaking down
• ✅ Weatherproof — marine-grade body, stainless hardware
• ✅ Quick-release — off in seconds when you need your bed back
• ✅ Lifetime warranty — from a real shop in Mesa, Arizona, with a real email address

Made in the USA • Lifetime Warranty • 3–5 Business Day Fulfillment • Free US Standard Shipping • 30-Day Returns

📦 Fulfillment & shipping

Every order takes 3–5 business days to fulfill. Your holder is built by hand in our Mesa, Arizona shop after you order — it is not pulled off an overseas pallet. Once it's built, it ships and you get tracking by email the moment it leaves.

Standard shipping is FREE on every US order — no minimum, all 50 states. Need it sooner? Express is a flat $15.99. We also ship to Canada, with rates calculated at checkout.

Not right for your setup? 30 days from delivery. Send it back unused in its original packaging for a full refund, no restocking fee — it's condition that matters, not a countdown. Comes back sellable but not as-new (mounted and removed, install marks, missing packaging) and a 20% restocking fee applies. Return shipping is your cost. Arrived damaged, defective or wrong? We cover everything. Full details in our Refund Policy.

Your rods cost more than this holder. Lock them down.

Frequently asked questions

Will it work with a tonneau cover?
Yes. The V4 sits low, riding over the wheel wells rather than up in the middle of the bed, so your rods clear a closed cover. Cover styles vary — message us your truck and cover type and we'll confirm the clearance before you order.

Will my spinning reels fit? Do I have to take reels off?
No. The V4 takes rods fully rigged — reels on, line strung. That's the main thing PVC tubes and bungee setups get wrong: they won't clear the lower guides on a spinning reel, so you end up breaking rods down every trip.

Is it cheaper to pick “2 Sets” or add two single sets?
Neither — they cost exactly the same, and both get the 10% bundle discount. Pick whichever is easier; “2 Sets — Both Sides” is one selection instead of two, and ships in one box.

How long does it take to get my order?
Orders take 3–5 business days to fulfill because every holder is made to order in Mesa, Arizona. Transit time is on top of that and depends on your address. You'll get tracking by email the moment it ships.

Do you offer free shipping?
Yes — free standard shipping on every US order, no minimum, all 50 states. If you need it faster, express shipping is a flat $15.99. Canada is calculated at checkout.

Will it fit my truck?
Track Mount fits trucks with factory bed rails (Tacoma, Tundra, Frontier, Titan, Gladiator). Clamp System fits everything else — F-150, Silverado, Sierra, RAM, Ranger, Maverick, Colorado, Canyon, or any flat bed. Full list is in the Vehicle Compatibility tab. Message us your year, make and model and we'll confirm before you order.

Do I have to drill anything?
No. No drilling, no permanent changes, no holes in your truck — and it comes off just as easily.

Will the rods actually stay put at highway speed?
Yes. The adjustable elastic strap pulls each rod down into its slot rather than just resting it there, and the mount is stainless-bolted or clamped to the bed itself. No bungees or extra braces needed.

What comes in one set?
One set mounts on one side of your truck bed. For support at both ends, choose 2 Sets — Both Sides above.

Can I still fit a kayak or cooler in the bed?
Yes — that's the point. Rods ride up on the rails, so your bed floor stays open. Several customers run a kayak down the middle with rods racked over the fender wells.

How many rods does it hold?
3 or 4 per set. So 2 Sets of the 4-rod supports four rods at both ends.

Will it hold up to weather?
Marine-grade construction and stainless steel handle salt, sun, rain and washboard backroads season after season. Backed by a lifetime warranty.

Why does the Clamp System cost more?
It's a complete no-rail mounting kit with heavier-duty hardware that grips your bed directly — no factory rails required. You're paying for the extra hardware that makes it fit.

What's your return policy?
30 days from delivery, condition-based rather than a countdown. Unused in original packaging gets a full refund, no fee. Still sellable but not as-new carries a 20% restocking fee. Drilled, cut or worn out can't be returned. Return shipping is your cost unless the item arrived damaged, defective or wrong. See our Refund Policy.